Welcome to Beltcon Industrials
 

Heavy Duty Fasteners

The potentially dangerous conventional bolt retaining clip on the bottom plate has been dispensed with. A patented square shank bolt is fixed into the bottom plate, this feature makes it a very safe product. Fasteners are supplied with 8.8 Hi-Tensile bolts and nuts to ensure high torque ability which provides a better belt joint. All sharp edges are removed to prevent injury during handling. Back and front radiuses of both top and bottom plates are chamfered to ensure scraper friendly fasteners.
 

Jackson's 'HAWK'® Conveyor Belt Fasteners

Size

No.1

No.1½

No.2

No.2¼

No.2½

No.3

 

m/m

m/m

m/m

m/m

m/m

m/m

For Belt Thickness

6-11

11-17.5

16-21

17-30

19-25

23+

Length Of Plate

48

66

83

96

102

114

Width Of Plate

22

27

29

29

38

38

Bolt Hole Centres

25

41

54

67

64

75

Bolt Sizes

6x42

8x47

8x47

8x57

10x59

10x59

Minimum Pulley Dia.

300

450

750

920

1050

1200

Sets Per Box

25 sets

25 sets

25 sets

25 sets

10 sets

10 sets

Weight per box

1.4kg

2.5kg

3.4kg

4.6kg

2.7kg

3.0kg

A full range of templates, application tools and steels available upon request.
 

Jackson's 'HAWK'® Conveyor Belt Fasteners
Number of sets per belt width

Belt Width        Inch (mm)

No.1

No.1½

No.2

No.2¼

No.2½

No.3

12" (300)

10

8

-

-

-

-

16" (405)

13

10

9

8

-

-

18" (450)

15

12

10

9

9

-

20" (510)

16

13

11

10

10

10

24" (610)

20

16

14

13

13

13

26" (660)

22

17

15

14

14

14

28" (710)

23

18

16

15

15

15

30" (760)

25

20

17

16

16

16

36" (915)

30

24

21

19

19

19

42" (1065)

35

28

24

22

22

22

48" (1220)

40

32

28

26

26

26

60" (1520)

50

40

35

32

32

32

72" (1830)

60

49

42

39

39

 39

“ FLEXCO “® Rivet hinged fasteners and application tools for all uses, in sizes :-
R5, R5- ½, R6

How FLEXCO® Rivet Hinged Fasteners Work  



Designed for newer synthetic carcass belting as well as older styles, FLEXCO® SR® (Self-Setting Rivet) Fastener utilizes a multiple rivet attachment. This provides maximum resistance to pull-out and allows the patented rivets to work between the carcass fibres without severing them. leaving the entire belt carcass intact. It does not rely solely upon the carcass material to resist pull-out. Because the rivets are self-setting, fasteners are installed quickly from the top side of the belt. Rivets are driven through the fastener plates and through the belt. passing between the carcass fibres. The specially shaped head of each pilot nail works in conjunction with the applicator tools' anvil plate to set the rivets. The same hammer blows that set the rivets, also compress the fastener plates into the belt cover. This simultaneous compressing and peening maintains each increase in compression. distributing the splice tension evenly across the full belt width. 		Applications

For underground mining and smaller pulleys on construction equipment, asphalt plants, aggregate and ready-mix plants, log belts and similar applications.

Installation Method
Fastener installed with portable fixture and hammer Fasteners are installed in one simple procedure with selfsetting rivets.

Fastener Profile
Fastener profile is smooth. Plates are specially bevelled to avoid hang-up.

P1W (pounds per inch width)
Use with belts that are mechanically rated up to 450 PIW for R5, 650 PIW for R5A/12 and 800 P1W for R6.

Pulley Diameter
SR® fasteners operate smoothly over pulleys as small as 9" in diameter (for R5).

Splicing Method
FLEXCO® Rivet Hinged Fasteners are secured to the belt by patented self-setting rivets in a staggered. five-point pattern. This offers maximum resistance to pull-out and evenly distributes tension throughout the fastener.

Metals Available
Steel. Plated Steel is the standard fastener material available. RustAlloy® is a lower chrome, stainless steel alloy. Stainless Steel. Type 316 stainless steel (R5 only).

Range
Operates on belts 7/32" or 6mm to 11/16" or 17mm thick and over a minimum pulley diameter of 9" or 230mm.

FLEXCO® Rivet Hinged Belt Fastener Selection Chart

A

B

C

Fastener Size

For belts with Mechanical fastener ratings up to:

Belt Thickness Range

Recommended Minimum Pulley Diameter

Operating tension under 100% of belt rating

Operating tension under 75% of belt rating

P.I.W.

kN/m

in.

mm.

in.

mm.

in.

mm.

R5

450

79

7/32"-7/16"

6-11 mm

9"

230 mm

7"

175mm

R5-1/2

650

114

3/8"-19/32"

9-14mm

12"

300 mm

10"

250 mm

R6

800

140

13/32"-11/16"

10-17mm

18"

450 mm

16"

400mmm

  
HOME BACK EMAIL WEBMASTER PRINT